|
| E-swipe is a user-friendly serial communication
software designed for the smart swipe readers. E-swipe
provides all the features you need to communicate
with the reader easily and efficiently. With E-swipe
you don't have to remember the commands that set the different
options on the reader you just have to select and click on the
command button.
E-swipe allows you to:
• Configure the communication port and
communication settings that best suit the hardware you are
using
• Set the bar code
options for every symbology that the reader supports. These
options include enabling and disabling the symbology, setting
the length of the bar code read, and specifying the bar code
prefix, etc.
• Set the magstripe options for track
1, 2 and multi-track readers. These options include enabling
and disabling the track, specify the the prefix and delimiter
characters, setting the magstripe length, etc.
• Set the relay, speaker, and LED options
to the desired settings
• Program the reader by sending the appropriate
commands
• NEW!
Enable or disable the password on the DC reader
• NEW!
Program STA/SA reader easily
• Create the schedule and employee files
to download to the reader. View the data files uploaded from
the reader using the built-in text editor
• Download a schedule and an employee file to the reader
and view the reader's response instantly
• Upload the access control list (employee and schedule
data) stored in the reader and save the data to a file, if
required
• Poll single or networked readers to obtain the transactional
data
• Add the computer date and time when polling the J reader
• Save all the data that is coming from the reader to
a log file
• NEW! Import
the transactional data to the Exeba® Time and Attendance
application
• NEW! Obtain,
select and download the access control list from Exeba-TAMS™
• Define the poll and delay settings such as time-outs
and poll delay
• Define the protocol parameters for the networked readers
• NEW! Test
the communication between the reader and software
Follow this
link to download a
demo version of E-swipe
Bug/Suggestion/Request Form
|
|
|
Hardware
Options
• Smart Mag J (tracks 1 & 2 or 2 & 3)
• Smart Slot J (visible or infrared)
• Smart Mag STA (tracks 1 & 2)
• Smart Slot STA (visible or infrared)
• Smart Mag DC (tracks 1 & 2)
Setup Options
• Configure the communication parameters
• Set readers for protocol (network)
or non-protocol mode
• Define the polling settings: time-out,
delays and poll addresses
• Set reader defaults in the software
• Set the application data source
• RS232/RS422/RS485 interface
All Reader Options
• Poll all types of readers, single
or networked
• Save the polled data to a text
file, or import it into the Exeba-TAMS™ database
• Reset the reader to the manufacturer's
default
• NEW!
Determine what communication settings
the reader is set on
• Send any command to program the
reader
• View the responses coming back
from the reader
• Edit, view, and print the data through its text editor
STA/SA Reader Options
• NEW!
Program some of the options on the reader
such as: turning bad ID logging on or off, setting the record size
...
• Download a text file of the employee and schedule data
• NEW!
Select and download Exeba-TAMS™ employee
and schedule data
• Upload the employee and schedule data from the reader
• NEW!
Purge the access control list on the reader
DC Reader Options
• NEW!
Enable, disable, clear and check the password
• NEW!
Access the total records captured by the
reader
• NEW!
Set the reader record size
List Price $299
E-swipe Manual (955k)
|
Exeba
Time & Attendance (TAMS)