| available options |
Infill device in front version (font OCR B1)
or in rear (font OCR A1 or MasterCard). LCD off line
editing. Auxiliary printer port. Chip contact initializing. |
| built-in tipper unit |
Off-line tipping possibility (11 lines).
Ribbon saving feature. |
| communication interface |
Serial RS232 port. |
| dimensions and weight |
745 x 485 x 290 mm x 54 kg,
(29,25"x19"x11,50"x120 lbs) |
| drum capacity |
Drum capacity: 60/80/105 characters,
embossing and/or infill. |
| electrical requirements |
117 V/60 Hz – 220 V/50 Hz. |
| input hopper capacity |
200 cards. Pre-embossed card feed
feature. |
| Magnetic stripe encoding |
3 Tracks ISO 7811, LoCo-MeCo/HiCo. |
| output hopper capacity |
100 embossed cards. |
| performance |
Approx. 260 CPH |
| reject |
Reject hopper. |
| software |
Windows based application software. Firmware:
self diagnostic, selectable automatic repeat card,
pre-encoded card reading with full post processing of
the same card, resettable and non resettable counters.
System status and diagnostic messages reported on
PC. |
