List Price: $2295.00

Print Specifications

• Thin film printhead with Energy Control
• Thermal transfer or direct thermal printing:
  • standard 203 dots/inch (8 dots/mm);
  • optional 152 dots/inch (6 dots/mm) or 300 dots/inch (12 dots/mm) resolution
• Maximum print width: 4.09"(104mm)

Media Dimensions

• Minimum label width: 0.79" (20mm)
• Maximum label width: 4.52" (115mm)
• Minimum label length: 0.5" (12mm) in rewind and peel modes, 0.63" (16mm) in tear- off mode, and 1.5" (38mm) in cutter mode
• Maximum print length:
  16.0" (406mm) 300dpi
  (w/std. mem.) 12.0" (304mm) 203dpi
  (w/std. mem.) 22.0" (558mm) 152dpi
• Total thickness (label and liner): 0.003" (0.076mm) to 0.012" (0.304mm)
• Maximum label roll diameter(OD): 8.0" (203mm)
• Media core inside diameter: 3.0" (76mm)
• Standard transmissive media sensing (label gap/notch)

Memory

• 1 MB DRAM

Ribbons

• Maximum outside diameter: 3.2" (81mm)
• Ribbon core inside diameter: 1.0" (25.4mm)
• Width range: 0.79" (20mm) to 5.31" (134.8mm)

Print Speeds

• Programmable constant printing speeds of 2" (51mm), 3" (76mm), 4" (102mm), 5" (127mm) and 6" (152mm) per second
• Speeds with optional 300dpi printhead are 2.4" (61mm), 3" (76mm) and 4" (102mm) per second

Printer Programming Options

• ZPL II or ZPL (selectable through software)
• Zebra printer driver for Windows operating system
• BAR-ONE Windows-based WYSIWYG on-screen label design application software
• PC-470 print controller with keyboard and display for stand-alone applications

Fonts

• 7 bitmapped, 1 scalable (CG Triumvirate Bold Condensed)
• IBM Code Page 850 International Characters
• Optional fonts: available on EPROM as scalable or smooth bit-mapped fonts in standard, bold, italic and bold italic
• Futura, CG Triumvirate Condensed, CG Palacio, CG Times or Univers character sets

Bar Codes/Symbologies

Code 11	UPC-A, UPC-E	Industrial 2 of 5
Code 39	EAN-8, EAN-13	LOGMARS
Code 93	Plessey	Postnet
Code 128 with subsets A/B/C and UCC Case Codes	Interleaved 2 of 5	EAN and UPC with 2 or 5 digit supplements
Codabar	Standard 2 of 5	MSI
ISBT 128
2-D Symbologies
CODABLOCK	PDF417	Code 49
Maxi Code	Datamatrix	QR Code

Electronics

• 32-bit microprocessor

Electrical

• Switch selectable 115 VAC +15/-20%,
• 5 amp fused; 230 VAC +/-15%, 3 amp fused (48-62Hz)

Communications Interface

• Centronics parallel or RS-232C serial ports, 110-19.2kB configurable BAUD rate, parity, data bits, XON-OFF/DTR protocol

Physical

• Height: 15.4" (391mm)
• Width: 10.5" (267mm)
• Depth: 18.9" (480mm)
• Weight without options: 43 lbs (19.5kg)

Environment

• Operating temperature: 41°F (5°C) to 104°F (40°C)
• Operating humidity 20-85% non-condensing
• Storage/transportation: -40°F (-40°C) to 158°F (70°C), 20% to 85% non-condensing R.H.

Options

• Label peel and liner rewind (for print-and-apply)
• Rewind (full label roll is rewound internally)
• High-performance cutter cuts full-width media, under software control (not compatible with rewind and peel options)
• Printhead 152.4 dots-per-inch (6 dots/mm) resolution
• Printhead 300 dots-per-inch (12 dots/mm) resolution
• Internal Fan-fold Media Supply Bin (not compatible with internal rewind or peel options)
• Additional scalable and smooth bit-mapped fonts
• Reflective (black mark) media sensor (in addition to standard transmissive sensor), switch selectable
• Specifications subject to change without notice.

Quick Specs

. Prints at 203dpi (8 dots/mm)
standard, optional 300dpi (12 dots/mm) and optional 152dpi
(6 dots/mm)

. Prints labels up to 4.09"
(104mm) wide

. Prints labels up to 37" (939mm) long at 6.0"/sec (152mm/sec)

. Direct Thermal and Thermal Transfer printing