Dynamag

Magnetic Stripe Card Reader


The Dynamag enables retailers to "future proof" their POS applications with support for both today's traditional applications and tomorrow's advanced security requirements. The Dynamag is 100% interface compatible with all traditional MagTek readers while also enabling advanced security features including card authentication, data encryption, and device/host authentication to be activated when higher security is demanded.

USB KB Dynamag card reader in Legacy Mode (non-encrypting at security level 2). This reader is intended for use by solutions which do not yet support encrypted card data using the Dynamag.

General Information
  • Interface Type: USB HID & USB Keyboard Emulation
  • Color: Black Reference
  • Standards: ISO 7810, ISO 7811, AAMVA
  • Recording Method: Two-frequency coherent phase (F2F)
  • Card Speed: 4 to 60 ips (10.1 to 152.4 cm/s)

    Electrical
  • CURRENT
  • Power Input: 5V from
  • USB bus
  • Normal mode: 110 mA maximum
  • Suspend Mode: 500 uA maximum

    Mechanical

  • Dimensions: 3.94" x 1.28" x 1.23"
  • Weight: Weight: 4.5 oz. (127.57 g)
  • Cable Length: 6 ft.
  • Connector: USB Type A plug

    Environmental
    TEMPERATURE
  • Operating: -30 C to 70 C (-22 F to 158 F)
  • Storage: -40 C to 70 C (-40 F to 158 F)

    HUMIDITY
  • Operating: 10% to 90% noncondensing
  • Storage: 10% to 90% noncondensing

    ALTITUDE
  • Operating: 0-10,000 ft. (0-3048 m.)
  • Storage: 0-10,000 ft. (0-3048 m.)


Return to Home Page


Return to Bar Code Scanners