E-swipe Software

Smart Mag J

Smart Slot J

Smart Mag STA

Smart Slot STA

Smart Mag DC


MagBar J Series

List Price - $579


The Magbar J series is the first and only dual-reader, allowing the reading of barcodes and magnetic stripes in the same slot. These are decoded readers with internal decoding and therefore need no external devices for decoding. They can be used anywhere where the reading of both barcodes and magnetic stripes are required, such as in security systems, time and attendance systems, college campuses, taxi, and retail installations. These readers are available in many different industry standard interfaces, are programmable, and are available with a variety of options, such as leds, alphanumeric displays, relays, and door sense inputs.






Scanning Speed   3-30 ips (7-76 cm/sec)
Magnetic Stripe   Track2, Tracks 1&2, or Tracks 2&3, each character set is supported on each track
Scan Direction   bi-directional
Symbologies   Code 39,2/5/I2/5,C128,UPCA,EAN13,Codabar
Resolution   7 mil (low), 13mil(high)
Read Height   0.4"(1cm) standard, 0.46" optional, other heights available on request
Good Read Beep   Programmable
Slot Width   0.050"(1.2mm)
Indicators   2 Leds (programmable)
Light Source   630nm(visible), 940nm(infrared)
Temperature   -40c - +85c
Dimensions   4.6"L x 2.4"W x 1.4"H, 11.6cm x 6cm x 3.5cm
Weight   6 ounces
Material   Black Polycarbonate
Power   5VDC(150ma), 8-15VDC, or 15-30VDC
Standard Wiring   3' (91cm) cable w/flying leads or connectors depending on interface
Sense Inputs   TTL level (minimal current draw)
Relay   30VDC 500ma or 5V TTL level (minimal current draw) outputs
Displays   Alphanumeric character display (8-character)

J RS232 Flowchart

Reference for Door Strike Vendors

Return to Product Profile Page