MS140 (I)
Bar Code
Slot Reader
The MS140 family of bar code slot readers is a flexible, cost effective solution when you demand a reliable and rugged slot reader. With a resolution of up to 6 mils (0.15 mm), the MS140 is capable of reading any bar coded identification badge.
It's sealed optical system is available in both visible light or infrared. The infrared units ensure accurate reading of either visible and laminated badges. Its water resistant base and rugged housing make the MS140 a popular choice in any environment. An optional mounting bracket is available to safely secure the unit in any direction.
Like most of our products, the MS140 is available with a variety of interfaces, including undecoded (TTL), keyboard wedge (XT/AT, PS/2 and Macintosh), and RS232. All Unitech undecoded products have pen output and can be connected to any of the our wedge line or to any external device that accepts pen input.
Decoded versions are easy to use and configure. Both the keyboard wedge
and RS232 can be configured on-screen by selecting the desired options
from a menu. And the configuration can be reproduced in other units by
generating
custom setup labels.
. Available with TTL, keyboard wedge and RS232 interfaces.
. Reads most popular bar code symbologies.
. Easy to use and configure.
. 50 mm to 750 mm/sec Scan Rate.
. 6 mil minimum resolution.
. Reads visible and laminated barcode labels.
. Advanced Data Editing.
. Rugged, lightweight housing.
. Wide slot allows thicker badges.
| Specifications | |
| ORDERING INFORMATION: | |
| Visible Light Barcode Slot Scanner With Cable | |
| MS140A | MS140 Scanner, undecoded, with DB9 squeeze & release connector |
| MS140-2 | MS140 Scanner with RS232 DB9 connector (may require 5V AC adapter) |
| MS140-3 | MS140 Scanner with keyboard wedge interface - DIN connector |
| MS140-3PS2 | MS140 Scanner with keyboard wedge interface - PS/2 MiniDIN connector |
| Infrared Light Barcode Slot Scanner With Cable | |
| MS140IA | MS140I Scanner, undecoded, with DB9 squeeze & release connector |
| MS140I-2 | MS140I Scanner with RS232 DB9 connector (may require 5V AC adapter) |
| MS140I-3 | MS140I Scanner with keyboard wedge interface - DIN connector |
| MS140I-3PS2 | MS140I Scanner with keyboard wedge interface - PS/2 MiniDIN connector |
| PERFORMANCE: | |
| Light Source | Infrared: 930 nm LED (MS140I) |
| Visible light: 660 nm LED (MS140) | |
| Sensor | Photo diode |
| Depth of field | 2 mm |
| Resolution | 6 mils (0.15mm) min. |
| PCS | 0.6 mm |
| Scan Rate | 2.0" (50 mm) to 30" (750 mm)/sec. |
| INTERFACE: | |
| Symbology | Code 39 standard and full ASCII, EAN-13, UPC-A, EAN-8, UPC-E, standard 2 of 5, Code 128, Code 93, MSI, Code 11, Code 32, Delta Code, Label Code, Plessey Code, Codabar |
| Interface | PC XT/AT, PS/2, Macintosh, RS232, TTL (undecoded) |
| Configuration | Setup via keyboard |
| Data Editing | Code id, preamble, postamble |
| MECHANICAL/ELECTRICAL | |
| Dimensions | 4.9 x 2.4 x 1.3" (123.5 x 60.5 x 33.0 mm) |
| Weight | 190g (TTL with cable) |
| Digital Output | Open collector, black = high level (TTL) |
| Power consumption | 35 mA for TTL @5V DC 5% |
| 70mA for Decoded version | |
| Cord | 6.9 ft. (2.1 m) straight line |
| Case | Material Stainless Steel |
| ENVIRONMENTAL | |
| Temperature | Operating: 32 to 122ºF (0 to 50ºC) |
| Storage: -4 to 140ºF (-20 to 60ºC) | |
| Humidity | 0% to 95% RH non-condensing |
| Mechanical | Shock 5 ft. (1.5 m) drop on concrete |
