MSR206 Hi-Co Magstripe Card Reader / Writer

 


Magstripe Reading / Writing Software

 

now available with USB interface!

ALL GENUINE




Features:

  • Read/Write magnetic stripe card conform to ISO 7811/1~6
  • Manual Swipe to read and/or write card with RS232 or USB output
  • Read/Write High & Low Coercive force of magnetic stripe (300~4000Oe)
  • 5~35ips operational swipe speed of writing data
  • 5~55ips operational swipe speed of reading data
  • +24VDC+/-10%, 2.0A Max, external power adapter attached
  • Write then verify single, dual or triple track of data in one swipe
  • High/Low Coercivity encoding circuitry selectable with a click on screen
  • Programmable leading bit, raw data, DMV/AAMVA etc & users format
  • 210mm(L) x 60mm(W) x 65mm(H)
  • CE, FCC, UL, cUL certified

 

Electrical
Power requirements +24VDC +/- 5%
Consumption Typical 350mA Max. 600mA plus for each writing track
Power supply External switching power 24V/2.5A
Communication Standard USB cable
Ripple 50mVp-p or less
Dielectric strength 500 VDC for 1 minute

Performance
Read card Track1 Track2 Track3
Bit per density 210 bpi 75/210bpi 210 bpi
Coercive force Read/write 300-4000 oe Mag.card
Card thickness 0.76-1.2mm
Read speed STD card Jitter +/-15% Amp. 60%
5-55ips 5-50ips 5-50ips
Write speed 5-30ips
Write jitter Interval < +/- 10%, Sub-interval < +/- 12%
Error rate Read < 0.5%
Write < 0.8%
Head life Min. 1000K swipes for both read/write head

Environments
Operation -10 to 55oC, 10 to 85% humidity
Storage -30 to 70oC, 10 to 90% humidity
Safety Approval
Rating FCC Class B, CE ClassB, UL, cUL

 

Exeba-COMM Encoding Software for Windows

Return to Previous Page