The CLXSA002MF0 Smart Card incorporates a 2,162,688 bit non-volitile memory organized as 1024 pages of 264 bytes each. This card is for advanced, low power applications such as large record storage and medical applications where size is a driving factor.

The CLXSA002MF0 offers a straight memory array that features ultra-high-endurance EEPROM for data that changes frequently. The entire array is rated at 10,000 ERASE/WRITE (E/W) cycles guaranteed. The CLXSA002MF0 advanced CMOS technology makes this device ideal for low-power non-volatile code and data applications.

The CLXSA002MF0 is available in the ISO 7810 standard, CR80, SIM/SAM and Keychain form factor.

  • Voltage operating range: 4.5V to 5.5V
    - Standby current 15 µa typical

  • Industry standard SPI bus protocol

  • Two 264 byte data buffers

  • 7 ms typical fast page write cycle time, 10 Mhz clock

  • Filtered inputs for noise suppression

  • Power on/off data protection circuitry

  • Endurance: 10,000 E/W cycles guaranteed

  • Electrostatic discharge protection > 1,500V

  • Data retention > 100 years

Figure 1. Block Diagram

Smart Card Reader / Writer - desktop

Smart Card Reader / Writer Software

Smart Card Portable Reader Mobile

MagTek Smart Card / Magstripe Reader Writer

Smart Card Matrix Selection Chart